Britec Tech Support Forum
problem with the Local Area Connection Adapter driver - Printable Version

+- Britec Tech Support Forum (https://briteccomputers.co.uk/forum)
+-- Forum: Technical Support (https://briteccomputers.co.uk/forum/forumdisplay.php?fid=21)
+--- Forum: Networking (https://briteccomputers.co.uk/forum/forumdisplay.php?fid=33)
+--- Thread: problem with the Local Area Connection Adapter driver (/showthread.php?tid=1135)

Pages: 1 2 3

problem with the Local Area Connection Adapter driver - DJWood1970 - 09-02-2015

hi brian and the rest of the members  

my first post Smile

i recently removed win10 as i didnt like it ..after the restore back to windows 7 i now find i cant connect to the internet Sad  i did a troubleshoot on network problems and i get this message ( "there might be a problem with the Local Area Connection Adapter driver " ) i have updated the network adaptor drive,disconected/reconected my router,disabled/enabled network adaptor,reinstalled the driver even tried a wireless card still no conection...HELP its driving me nuts

RE: problem with the Local Area Connection Adapter driver - GuiltySpark - 09-02-2015

You could try opening an elevated cmd prompt and typing:

ipconfig /flushdns (hit Enter)

then,

ipconfig /release (hit Enter)
ipconfig /renew (hit Enter)

RE: problem with the Local Area Connection Adapter driver - DJWood1970 - 09-02-2015

(09-02-2015, 12:55 PM)GuiltySpark Wrote:  You could try opening an elevated cmd prompt and typing:

ipconfig /flushdns    (hit Enter)

then,

ipconfig /release     (hit Enter)
ipconfig /renew       (hit Enter)


so i tried this is what i getback

Microsoft Windows [Version 6.1.7601]
Copyright © 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig /flushdns

Windows IP Configuration

Successfully flushed the DNS Resolver Cache.

C:\Windows\system32>ipconfig /release

Windows IP Configuration

The operation failed as no adapter is in the state permissible for
this operation.

C:\Windows\system32>ipconfig /renew

Windows IP Configuration

The operation failed as no adapter is in the state permissible for
this operation.

C:\Windows\system32>

RE: problem with the Local Area Connection Adapter driver - Britec - 09-03-2015

Please can you follow these steps.

1. Open Command Prompt and then select Run as Administrator
2. Now type: netsh winsock reset catalog and press ENTER
3. Next type: netsh int ip reset reset.log and press ENTER
4. Now restart your computer
5. Once computer has restarted, open Command Prompt and Run as Administrator
6. Please type: ipconfig /release and press ENTER
7. Now type: ipconfig /renew and press ENTER

RE: problem with the Local Area Connection Adapter driver - DJWood1970 - 09-04-2015

(09-03-2015, 03:03 PM)Britec Wrote:  Please can you follow these steps.

1. Open Command Prompt and then select Run as Administrator
2. Now type: netsh winsock reset catalog and press ENTER
3. Next type: netsh int ip reset reset.log and press ENTER
4. Now restart your computer
5. Once computer has restarted, open Command Prompt and Run as Administrator
6. Please type: ipconfig /release and press ENTER
7. Now type: ipconfig /renew and press ENTER


after restart i got to part 6 hit enter and got this message back

The operation failed as no adapter is in the state permissible for
this operation.

RE: problem with the Local Area Connection Adapter driver - Compton - 09-04-2015

ok boot up Linux

rufus

Linux lite

if it work its software

if it don't its hardware

RE: problem with the Local Area Connection Adapter driver - Britec - 09-05-2015

Try what Compton say and then can you post me the results of ipconfig /all

  1. Open Command Prompt and then select Run as Administrator
  2. Type: ipconfig /all
  3. Please copy the results and post them on here please.
  4. I need to see if Ethernet adapter or Wireless adapter is installed on that machine.


RE: problem with the Local Area Connection Adapter driver - DJWood1970 - 09-05-2015

(09-05-2015, 09:16 AM)Britec Wrote:  Try what Compton say and then can you post me the results of ipconfig /all


  1. Open Command Prompt and then select Run as Administrator
  2. Type: ipconfig /all
  3. Please copy the results and post them on here please.
  4. I need to see if Ethernet adapter or Wireless adapter is installed on that machine.


sorry for the late replys ...work calls lol

anyway here are the results

Microsoft Windows [Version 6.1.7601]
Copyright © 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : DavidWood-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

C:\Windows\system32>

RE: problem with the Local Area Connection Adapter driver - Compton - 09-06-2015

I don,t think you have Ethernet adapter or Wireless adapter install

what is your computer model?

RE: problem with the Local Area Connection Adapter driver - DJWood1970 - 09-06-2015

(09-06-2015, 02:18 PM)Compton Wrote:  I don,t think you have Ethernet adapter or Wireless adapter install

what is your computer model?


hi

its an op3 system and the motherboard is an asrock g31m-gs,it was conecting to the internet just fine until i removed windows10,i have tried everything but i just cant figure the problem Sad