Posts: 1,398
Threads: 332
Joined: Dec 2015
Reputation:
25
I have a dx7300 slim tower that i installed the ram from a stock dell dimension 8400, will i have any problems by doing this? Voth of the ram sticks are ddr2 so i didnt think anything of it so i figured id get a second opinion is all
Posts: 4,727
Threads: 311
Joined: Sep 2014
Reputation:
102
Dell Dimension 8400 - P4 540 3.2 GHz
RAM
Memory Speed 400 MHz
Memory Specification Compliance PC2-3200
Features dual channel memory architecture, unbuffered
HP Compaq dx7300 Slim Tower PC
Supports up to 4-GB of DDR2 SYNCH DRAM. Slot 1 is black and must always be populated.
Memory upgrades are accomplished by adding single or multiple DIMMs of the same or varied sizes.
DDR2 PC2-5300 (667-MHz) and PC2-6400 (800-MHz) memory.
<left><form action="https://www.paypal.com/cgi-bin/webscr" method="post">If you are satisfied with my help, consider a donation. Thank you so much for your continued support!
<input type="hidden" name="cmd" value="_s-xclick">
<input type="hidden" name="hosted_button_id" value="Y4ZDLXGFS4F8Q">
<input type="image" src="https://www.paypalobjects.com/en_US/GB/i/btn/btn_donateCC_LG.gif" border="0" name="submit" alt="PayPal — The safer, easier way to pay online.">
<img alt="" border="0" src="https://www.paypalobjects.com/en_GB/i/scr/pixel.gif" width="0" height="0">
</form>
</div></left>
Posts: 1,398
Threads: 332
Joined: Dec 2015
Reputation:
25
Does that mean i shouldn't do it brian?
Posts: 1,856
Threads: 46
Joined: Sep 2014
Reputation:
46
You can do it if you choose but you won't have the same speed and performance as the PC2-6400.
Just make sure they are equal amounts of RAM i.e, 2 x 4GB or 8GB or 1GB etc.
Posts: 1,398
Threads: 332
Joined: Dec 2015
Reputation:
25
Ahh ok, the main reason im doing the switch is because the dx7300 was refurbished and i noticed not all of the ram sticks were the exact same but as for the dell it it had 4 ram sticks of the same and i haven't been using it so traded 2 for 4 basically well thank you all for your help and dont forget bastards are bastards hahaha your awesome guilty spark
Posts: 1,856
Threads: 46
Joined: Sep 2014
Reputation:
46
You could've used the 4 sticks of RAM if they were all the same Gig as your MOBO is Dual Channel so 4 slots equals 2 slots running as one and the other two running as one but both being of equal amounts i.e,
Slot1 Slot2 Slot3 Slot4
2GB 2GB 2GB 2GB
This gives you an even speed variance, if any were of different speed all RAM would be downgraded to work at its lowest RAM size.
For example:
Slot1 Slot2 Slot3 Slot4
2GB 2GB 64MB 2GB
In this set up all RAM would run at 64MB and your system would probably crash unless running XP or Linux.
Posts: 1,398
Threads: 332
Joined: Dec 2015
Reputation:
25
Oh alright, since i have 4 sticks of the same ram and are all 512mb a piece than i should be good to go then
Posts: 1,398
Threads: 332
Joined: Dec 2015
Reputation:
25
1. Would having two 1gb sticks of ram mixed with 512mb memory sticks hurt performance with the dell dimension 8400?
2. Lets say i mixed 4 ram sticks that were 1gb a piece but the ram was mixed with buffered and unbuffered, would the system info in the bios tell me that the ram sticks were different types or would it say that all the ram sticks were unbuffered?
Posts: 5,029
Threads: 207
Joined: Feb 2015
Reputation:
145
I would only use unbuffered 8400 probably only support that