10-16-2014, 06:53 AM
Hello,
Sorry, I inadvertently posted this thread in the introduction thread.
I need help with the above mentioned Machine because several problems going on. The first problem started off with the CD/DVD drive unable to read a cd/dvd even though the cd/dvd icon is visible. I unplug and reconnected the cable to no avail, and I also deleted the upper and lower filters. Now here is the other problem that arose. As you will note this machine has three usb ports in the back and two ports in the front (no p/s 2 ports installed). At the time I started working on the machine, only the front ports were functioning (the ones in the back weren't) which was ok since I had a usb to p/s 2 connector to connect keyboard and mouse. I don't know if deleting the filters worked because now none of the usb ports are working; therefore, I am at a loss. I was considering installing a usb adapter, but then what about installing the hardware drivers? Any
help is greatly appreciated.
Thanks in advanced
cdiana
Sorry, I inadvertently posted this thread in the introduction thread.
I need help with the above mentioned Machine because several problems going on. The first problem started off with the CD/DVD drive unable to read a cd/dvd even though the cd/dvd icon is visible. I unplug and reconnected the cable to no avail, and I also deleted the upper and lower filters. Now here is the other problem that arose. As you will note this machine has three usb ports in the back and two ports in the front (no p/s 2 ports installed). At the time I started working on the machine, only the front ports were functioning (the ones in the back weren't) which was ok since I had a usb to p/s 2 connector to connect keyboard and mouse. I don't know if deleting the filters worked because now none of the usb ports are working; therefore, I am at a loss. I was considering installing a usb adapter, but then what about installing the hardware drivers? Any
help is greatly appreciated.
Thanks in advanced
cdiana