Help with ESET booting to windows machine

[imoz2]

I am unable to easily boot to a USB flash drive on my computer. I have a Lenovo H430 and I have to go in to CMOS and enable CSM and change the boot mode to Legacy from UEFI. Then I can boot to a flash drive. Then when I boot to my new ESET flash drive it gives me a warning "Warning The NTFS partition with label Windows8_OS is hibernated.. Please resume Windows and turn it off properly , so mounting could be performed safely. It continues, Turning Windows off properly could be done by running this command from the command line. c:/ shutdown /s /t @ Please select one option below
1. Reboot the computer to unhibernate the NTFS partition using the command Line Prompt. ( Nothing happens Here when I do this except the machine reboots and i am the caught in a loop doing the same thing all over again. or
2. Mount the partitions read only . Effective "Cleaning" will not be possible. If I select this option I can scan but it shows I have 7 problems but will not fix them.

Then it does create a log but I can't save the log so I can access it in Windows at a later time.

Please help

[TopFreeware]

Hi, also turn off fast boot if that is in the CMOS

[imoz2]

Have tried turning off quick boot and it makes no difference. It seems this may be a puzzler.

[TopFreeware]

Can you get into safe mode?

[imoz2]

(10-27-2014, 10:03 PM)TopFreeware Wrote:  Can you get into safe mode?

Yes, by going into msconfig and clicking the boot tab.

[zINc]

Make sure to turn off "Secure Boot" in the CMOS

[imoz2]

(10-28-2014, 03:25 AM)zINc Wrote:  Make sure to turn off "Secure Boot" in the CMOS

That option is not available anywhere in my CMOS that I can find