Installing internal cables from the case to Motherboard

[LarryTheComputerGuy]

(07-20-2017, 10:39 AM)Compton Wrote:  Larry great  points but I think we should stay only on the topic  of  connecting  case system

when you mention too many things the thread can jump  all over the place

don't take it the  wrong  way just my suggestion

May I suggest coffee? Or maybe a nap? wow....

[Compton]

nope I am good on both of them

[LarryTheComputerGuy]

(07-20-2017, 11:44 AM)Compton Wrote:  nope I am good  on both of them

Just checking, because my answer was about connecting the case fan. The OP never mentioned anything about installing a CPU, he clearly stated that he was installing the Heatsink and fan. You misread the post and got confused thinking he was installing a CPU and the CPU was sliding.

[Martin2781]

(07-20-2017, 01:26 PM)LarryTheComputerGuy Wrote:  

(07-20-2017, 11:44 AM)Compton Wrote:  nope I am good  on both of them

Just checking, because my answer was about connecting the case fan. The OP never mentioned anything about installing a CPU, he clearly stated that he was installing the Heatsink and fan. You misread the post and got confused thinking he was installing a CPU and the CPU was sliding.

i was mentioning all of them i'm a complete newbie so compton sue as been guiding me with britec to help me build a computer, the bits i mentioned is the little wires from the case ie power button, i have fixed the cpu fan onto the cpu after awhile of annoying latch system lol

[Compton]

hi Larry I was not calling any member out sorry if I did

what i mean say  is that mentioning  your heatsink just slid a bit during install, it should be fine.may take the  tread off topic

it have happen before my suggestion was if we can keep the tread  on connecting system fan that would be great

yes I did misread his post which can sometimes happen its all good


sorry if i did anything wrong big boss did mean to  

[LarryTheComputerGuy]

(07-20-2017, 02:01 PM)Compton Wrote:  hi Larry I was not calling any member sorry if I did

what mean say  is that mentioning  your heatsink just slid a bit during install, it should be fine.may take the  tread off topic

it have happen before my suggestion was if we can keep the tread  on connecting system fan that would be great

yes I did misread his post which can something happen its all good


sorry if i did anything wrong big boss did mean to  

It's all good...

[Compton]

Martin2781 glad you could get everything hooked hope your build is successful


Sometimes I ask myself why even bother with this forum anymore

[Martin2781]

(07-20-2017, 05:04 PM)Compton Wrote:  Martin2781  glad you could get everything  hooked hope your build is successful  


Sometimes I ask myself why even bother with this forum anymore

slowly getting used to this lol manuals not very good and being dislexic not good lol
i got a cd support disk with my motherboard what does it do

[Compton]

the CD will have the drivers for motherboard

[UABF44]

Martin: I'll link you the latest drivers in a sec

Audio: https://www.station-drivers.com/index.php?option=com_remository&Itemid=353&func=fileinfo&id=2969&lang=en

Lan: https://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false

Chipset: https://support.amd.com/en-us/download/chipset?os=Windows+10+-+64 (Can also be used on 7 and 8/8.1, also untick power plan when installing, that's only for Ryzen... Your system is not Ryzen-based)

Also make sure to transfer these drivers to a USB drive first and then when you're finished with installing Windows transfer them to the PC, then install all the drivers. Also if you're on W10 I highly suggest having your internet unplugged until you install all the drivers so that there isn't any interference.

P.S. What's the model of your graphics card?