Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Your PC ran into a problem and needs to restart
#1
After trying to install a fresh install of windows 10 on an older windows 7 mini desktop PC I get the blue screen of "Your PC ran into a problem and needs to restart". Windows 10 installed then did the first reboot and instantly comes up with the error and I can't get past it to the setup stage. I have reset all the bios settings and Windows 7 was working on it no problem before so does anyone have any ideas why this is happening?
Reply

#2
Try use a difference hard drivee could be a failing hdd

Could you give us a update https://briteccomputers.co.uk/forum/showthread.php?tid=4403
Reply

#3
Please upload your system specs
Reply

#4
(08-30-2018, 05:38 PM)Partha Wrote:  Please upload your system specs

It has:

Intel® Core™ i3-3240 CPU @ 3.40GHz
4GB DDR3 Fury HyperX Ram
Shuttle motherboard (can't see a model number)
It has an optical drive and a Dynamode Wireless PCI Card

Its a Shuttle Mini PC like this:
https://www.newegg.com/global/uk/Product/Product.aspx?item=0ZK-02W8-00002
Reply

#5
I would run your issue by Shuttle support.

https://us.shuttle.com/support/
Tim's Computer Repair (TCR) 
1503 Kings Way, Savannah, GA 31406, US
912-220-0765
https://www.TimsComputerFix.net 

Reply

#6
I installed an SSD with a copy of Windows 10 on it and it booted just fine, so it has got to be something to do with the hard drive that's in it. It's a 500GB Seagate Barracuda.

The Hard drive was working perfectly fine on Windows 7 before I tried to install a fresh copy of Windows 10 on the same system?
Reply

#7
I would say the hard drive is failing

Check the hard drive health status

https://briteccomputers.co.uk/forum/showthread.php?tid=695

https://briteccomputers.co.uk/forum/showthread.php?tid=678
Reply

#8
(09-01-2018, 09:42 AM)Ajaay27 Wrote:  I installed an SSD with a copy of Windows 10 on it and it booted just fine, so it has got to be something to do with the hard drive that's in it. It's a 500GB Seagate Barracuda.

The Hard drive was working perfectly fine on Windows 7 before I tried to install a fresh copy of Windows 10 on the same system?

Well there you go then. Sometimes those Hard drives do strange things when they start to go.
Tim's Computer Repair (TCR) 
1503 Kings Way, Savannah, GA 31406, US
912-220-0765
https://www.TimsComputerFix.net 

Reply

#9
It would be better if we check the drive's health first with a program like CrystalDsikInfo. Download link - https://tinyurl.com/y88l2e7f
Reply

#10
(09-02-2018, 05:10 AM)Partha Wrote:  It would be better if we check the drive's health first with a program like CrystalDsikInfo. Download link - https://tinyurl.com/y88l2e7f

I have tried to do that step, but because I have already wiped windows 7 and installed windows 10 on the drive it won't boot on the computer it came from because of the problem. I tried connecting it to my PC with a SATA to USB cable but my computer doesn't recognise it and when I go to Disk Part to check if its there, it is but has a red X on it and when I try to initialise it I get an error.

So I'm trying to figure out other ways I can check the health of the Hard drive.
Reply



Forum Jump:


Users browsing this thread:
1 Guest(s)

Powered By MyBB, © 2002-2024 Melroy van den Berg.