|
ethaneh
|
 |
« on: August 30, 2010, 01:29:32 AM » |
|
hi this is strange problem iv encounterd what happend is that i instled xp on to a machine and all usb devices worked like my flash drive and usb mouse and usb modem. so i instled all my drivers and that worked untill i instled a amd driver.and when i restarted machine every time i now connect a usb device the whole machine freazes up solid u carnt press or do anythink.but when no usb device is connected the machine will not freaze only when i connect a usb device it frezzes has anyone got soultion.thanks ethan
|
|
|
|
|
Logged
|
|
|
|
|
|
Britec
|
 |
« Reply #1 on: August 30, 2010, 01:42:16 AM » |
|
Try a "complete" USB driver renewal and see if that helps.
Create a file with NOTEPAD containing the following lines and save it as FIX.REG
-------------------------- cut after this line -------------------------------- REGEDIT4
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment]
"DEVMGR_SHOW_NONPRESENT_DEVICES"="1" -------------------------- cut before this line --------------------------------
Double click on FIX.REG and say YES to the Merge Into Registry question.
Important:
Unplug ALL USB devices.
Open Device Manager. View, Show Hidden Devices. Uninstall all devices under USB Controllers. Uninstall all devices under Disk Drives that you know are not present. Uninstall all devices under Storage Volumes. Say no to any reboot prompts until you are finished. Also, if a Storage Volume doesn't uninstall, ignore it and move to the next one. If you have a yellow ? with unknown devices, uninstall all of the entries there as well.
When this is done, reboot TWICE.
Reconnect the USB devices and see if they're recognized properly.
|
|
|
|
« Last Edit: August 30, 2010, 01:43:50 AM by Britec »
|
Logged
|
|
|
|
|
BJseal91
|
 |
« Reply #2 on: August 30, 2010, 01:51:54 AM » |
|
Great Tips Brian This should work also there are freeware thats helps you reconize unidentifed softweare here is a tool that dose something very simlior Hope This Helps Kind Regards Bradley http://www.zhangduo.com/udi.htmlthis is quit good I have use this myself before to indetifi unidentified devices
|
|
|
|
|
Logged
|
|
|
|
|
|
|
ethaneh
|
 |
« Reply #3 on: August 30, 2010, 02:17:40 AM » |
|
hi britec did what you said but after i restarted twice it found everythink i uneanstled and a pop up come up and said found new hardware and it got to the bit where it said please wait while the wizard installs the software and the hardware was called standard OpenHCD USB Host Controller and then another pop up come up and said the software you are installing for this hardware standard OpenHCD USB Host Controller has not passed windowss logo testing to verify its compatibility with windows xp and then there was two boxs to click continue anyway or stop installation so i trid to click continue Anyway but as i trid everthink jammed again so i carnt click anythink.any ideas.
thanks than
|
|
|
|
|
Logged
|
|
|
|
|
Britec
|
 |
« Reply #4 on: August 30, 2010, 02:45:15 AM » |
|
So what was the USB device that is causing this problem?
|
|
|
|
|
Logged
|
|
|
|
|
ethaneh
|
 |
« Reply #5 on: August 30, 2010, 02:57:42 AM » |
|
i had no usb device connected when i did the steps you said to do.but before i did your steps i had problems with any usb device i connected to the machine straight away it would frezze right up.i still carnt connect any device not to it please help me britec.thanks ethan
|
|
|
|
|
Logged
|
|
|
|
|
Britec
|
 |
« Reply #6 on: August 30, 2010, 11:21:58 AM » |
|
|
|
|
|
|
Logged
|
|
|
|
|
ethaneh
|
 |
« Reply #7 on: August 31, 2010, 11:12:46 PM » |
|
hi britec i have got one yellow ouestion mark next to smbus but when i try and search for the driver is says windows canot instle hardware.all of the mother board drivers are instled
|
|
|
|
|
Logged
|
|
|
|
|
Britec
|
 |
« Reply #8 on: September 01, 2010, 03:30:19 AM » |
|
sorry for delay, you can try drivermax to see if it finds the driver for you.
|
|
|
|
|
Logged
|
|
|
|
|
ethaneh
|
 |
« Reply #9 on: September 01, 2010, 10:15:06 AM » |
|
thanks britec ill give it a try
|
|
|
|
|
Logged
|
|
|
|
|