0x1000008E ntoskrnl.exe - Printable Version +- Britec Tech Support Forum (https://briteccomputers.co.uk/forum) +-- Forum: Technical Support (https://briteccomputers.co.uk/forum/forumdisplay.php?fid=21) +--- Forum: Operating Systems (https://briteccomputers.co.uk/forum/forumdisplay.php?fid=22) +---- Forum: Windows Vista (https://briteccomputers.co.uk/forum/forumdisplay.php?fid=25) +---- Thread: 0x1000008E ntoskrnl.exe (/showthread.php?tid=4076) |
0x1000008E ntoskrnl.exe - smirk24 - 02-12-2018 I currently ran into a bsod 0x1000008E (0xFFFFFFFFC0000005, 0xFFFFFFFF81A84B4D, 0xFFFFFFFF88197924, 0x0) ntoskrnl.exe (nt+0x233B4D) which was strange because iwas just going through my services. System Specs: https://speccy.piriform.com/results/cdoKfl7JuIZIbBpESDTmZLI I have done: 1. chkdsk /f found problems (log is below) 2. sfc /scannow found problems (lof was to big to add) 3. Adwcleaner (found nothing) 4. Norton Power Eraser(found uac is disabled) ( I purposely disabled uac) 5. Farbar Recovery Scan Tool (Logs Below) [attachment=3350] [attachment=3351] [attachment=3352] [attachment=3353] The bsod just happened today no previous bsods RE: 0x1000008E ntoskrnl.exe - Britec - 02-12-2018 What was you doing on the computer at the time of the BSOD? RE: 0x1000008E ntoskrnl.exe - smirk24 - 02-12-2018 (02-12-2018, 09:49 PM)Britec Wrote: What was you doing on the computer at the time of the BSOD? I had firefox open to its default page it installs with and i had windows services open and i was researching some of the services RE: 0x1000008E ntoskrnl.exe - Britec - 02-12-2018 Please upload dump file to OSR Online this will debug the dump file. It also wont hurt to run memtest RE: 0x1000008E ntoskrnl.exe - smirk24 - 02-12-2018 (02-12-2018, 10:08 PM)Britec Wrote: Please upload dump file to OSR Online this will debug the dump file. It also wont hurt to run memtest Alright thank you britec. I forgot to add but i ran windows memory diagnostic and every thing turned out good. But i just also ran into bsod stop 0x00000019 while i was starting my workstation service RE: 0x1000008E ntoskrnl.exe - smirk24 - 02-12-2018 (02-12-2018, 10:32 PM)smirk24 Wrote:(02-12-2018, 10:08 PM)Britec Wrote: Please upload dump file to OSR Online this will debug the dump file. It also wont hurt to run memtest Is this type of ram not compatible with a dell dimension 8400? Type: DDR2 Size: 1024 MBytes Manufacturer: Kingston Max Bandwidth: PC2-5300 (333 MHz) Part Number Serial Number: 2450045350 RE: 0x1000008E ntoskrnl.exe - Britec - 02-13-2018 Dell Dimension 8400 Only Supports DDR2 non-ECC memory only Search here Make sure you run 8 passes minimum with one stick in at a time with memtest. It also could be a driver issue RE: 0x1000008E ntoskrnl.exe - smirk24 - 02-14-2018 (02-13-2018, 01:07 PM)Britec Wrote: Dell Dimension 8400 Only Supports DDR2 non-ECC memory only It was the ram that was installed. Thanks for your help britec |