+- Britec Tech Support Forum (https://briteccomputers.co.uk/forum)
+-- Forum: Members Area (https://briteccomputers.co.uk/forum/forumdisplay.php?fid=53)
+--- Forum: General Discussion (https://briteccomputers.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: raid setup to single disk (/showthread.php?tid=4936)
raid setup to single disk - davedave - 03-19-2019
I have an msi notebook which is configured as raid 0 using two 250gb ssd on the motherboard. (NOT software raid). I have backed up the ssd's with both Trueimage 2019 and EaseUS ToDo backup. I would like to change this configuration to a single disk using AHCI and restoring the OS which is windows 10 pro 1809, using one of the two backup programs above. Can this be done. Nice to see a video of this if posisble. thanks dave
RE: raid setup to single disk - Compton - 03-19-2019
What you have to do is format a ssd then restore the image using acronis true image
- make sure you change it raid 0 to single disk in the bios first
- make sure the ssd is bigger than the image you are restoring from
- create an acronis true image recovery flash drive so you can restore the image https://www.acronis.com/en-us/support/documentation/ATI2019/index.html#26974.html
RE: raid setup to single disk - davedave - 03-19-2019
(03-19-2019, 08:24 PM)Compton Wrote: What you have to do is format a ssd then restore the image using acronis true imagethanks for your help. i shall try this.
- make sure you change it raid 0 to single disk in the bios first
- make sure the ssd is bigger than the image you are restoring from
- create an acronis true image recovery flash drive so you can restore the image https://www.acronis.com/en-us/support/documentation/ATI2019/index.html#26974.html