03-31-2016, 07:34 PM
ok update the virus database then re scan after scan is completed please upload the logs
Windows 10 Boot Loop (Ran Into Problem/Restart In...)
|
03-31-2016, 07:34 PM
ok update the virus database then re scan after scan is completed please upload the logs
03-31-2016, 11:30 PM
The scan is still in progress. It's finding threats as I type this. I'm just curious though, is it necessary to have the Ethernet cable still connected? It's already been updated.
its not necessary but I would leave it don,t want to interrupt the scan
how much treats did it find so far
The scan is complete. I've disconnected the Ethernet cable now.
Threats found: 232 Threats cleaned: 226 The scan log doesn't have an export button.
04-01-2016, 02:00 AM
wow ok reboot check to see if you can boot into windows 10
04-01-2016, 02:12 AM
Do I have to change the boot priorities?
04-01-2016, 02:13 AM
turn off with the power button then start it up back
It goes to the SysRescue
I'm running another scan with a new setting enabled: "Unwanted applications." After this scan has finished, I'll try and reboot into Windows.
So I tried to boot into Windows and it said "No Operating System Found." I then went back to BIOS and went back to the default settings and tried. Same thing.
I'm getting two options when I try to boot into windows Start troubleshooting (recovery) Start BIOS setup I've changed the settings back and I'm running another scan. I'm not sure what to do
04-01-2016, 12:01 PM
How to Run Startup Repair in Windows 10 https://www.tenforums.com/tutorials/27649-startup-repair-run-windows-10-a.html
if that don,t work then do this Repair Master Boot Record (MBR) in Windows 10 / 8 / 7 https://www.thewindowsclub.com/repair-master-boot-record-mbr-windows |
Users browsing this thread: |
1 Guest(s) |