Posts: 14
Threads: 7
Joined: Sep 2015
Reputation:
0
Hey guys! Hope y'all doing well.
I been having this problem with my laptop lately of windows starting up, When I turn on the laptop everything seems to be fine, until I get where it says " welcome to windows " and the screen goes black but mouse arrow visible. Any idea what could be the problem? Thanks!
Posts: 685
Threads: 128
Joined: Mar 2016
Reputation:
67
What version of Windows are you using?
WannaBeGeek
Posts: 5,029
Threads: 207
Joined: Feb 2015
Reputation:
145
try starting up in safe mode
Posts: 65
Threads: 2
Joined: Mar 2016
Reputation:
0
Try starting in safe mode, then check if there are any new drivers that have been downloaded lately.
Posts: 14
Threads: 7
Joined: Sep 2015
Reputation:
0
05-31-2016, 03:42 PM
(This post was last modified: 05-31-2016, 03:42 PM by leosteel111.)
I'm using windows 7
Started in safe mode but no use
Posts: 5,029
Threads: 207
Joined: Feb 2015
Reputation:
145
still getting the black screen could be malware
scan with rescue Disk or USB
Posts: 1,630
Threads: 20
Joined: Sep 2014
Reputation:
31
leosteel111 If you have a Windows 7 recovery media you can select "Repair my Computer" and then select "Startup Repair". If that does not work then you can try running command prompt from the recovery and run the chkdsk /r /f command on the drive your OS is installed on.
Posts: 124
Threads: 20
Joined: Sep 2014
Reputation:
5
06-01-2016, 05:03 AM
(This post was last modified: 06-01-2016, 05:03 AM by TopFreeware.)
Sometimes the boot gets corrupted.
Try the previous suggestions and boot to recovery console from USB or set up disk and type bootrec /Fixboot or bootrec /Fixmbr. If they don't work try typing in bootrec /Scanos that should show atleast 1 windows installation. Lastly try bootrec /Rebuildbcd.
If these don't work maybe try and use system restore if that feature was enabled.
