Login

**Great White** · (This post was last modified: 03-11-2015, 05:08 PM by Britec.)

Ok so I go through it all and get to the end where you talk about creating an ISO image.

From what I can work out, the whole amount of data is 11GB (ie my work folder is 11.5GB).

But when I try to put it onto an USB (16GB), it does not fit.

Should I get a bigger USB, or am I doing something wrong perhaps?

Here is an image:

Also, if I am successful and manage to get it onto the USB, do I just put the USB in and boot from USB (when I want to reinstall windows)?

TIA.

**Compton** · (This post was last modified: 03-11-2015, 05:15 AM by Compton.)

try formatting the flash drive to ntfs

after creating the iso use this program https://rufus.akeo.ie/ to write the iso on to the flash drive

then you will have to set the boot order in the bios so you can boot from the flash drive

**Great White** · 03-11-2015, 07:00 AM

Thanks mate, I will try that later tonight and see how I go.

**Great White** · (This post was last modified: 03-11-2015, 09:39 AM by Great White.)

When I do that, it creates an ISO file that is only 5GB in size.

Can someone check my screenshot:

https://www.flickr.com/photos/66040892@N03/16780183871/

And tell me which one to create the ISO from?

***Britec*** · (This post was last modified: 03-11-2015, 05:28 PM by Britec.)

Open your auto-saved session and place tick in create ISO and push start.

You can also export your work and reload it a just check-mark create ISO and press start.